NocturneEdge Sex Bench | Adjustable, Handrails & Mount

Specifications

Type: Adjustable-height bouncing sex bench with handrails and dildo mount

Overall Dimensions: 22.83" W × 11.61" H

Seat Width: 12.52"

Handrail Height: 5.31" above the seat

Height Adjustment: 3.93" threaded range

Weight Capacity: 300 lbs

Frame: High-strength stainless steel

Support: Two elastic bands mounted in parallel

Handrails: Padded armrests at the head

Toy Mount: Mounting plate on the lower frame for suction cup toys

Feet: Sponge covered — protects floors and frame

Material: Environment-friendly, non-toxic

Assembly: Approximately 5 minutes

Portability: Disassembles for carrying and storage

Color: Black

---

Why You'll Love It

Nearly four inches of adjustment. A 3.93" threaded height range lets you tune the bench to your bodies and the position — not the other way around. None of the standard fixed-height stools come close.

Hands-free riding built in. A mounting plate on the lower frame holds a suction cup toy steady, turning the bench into a fully hands-free setup for solo play or a very different angle with a partner.

Two bands, better balance. Parallel elastic bands spread the load across the seat instead of concentrating it — steadier support and a smoother rise and fall.

Grip and take control. Padded armrests sit 5.31" above the seat, giving you real leverage to control force, twist, and depth without bracing against anything else.

Nothing tips. Holding the armrests keeps you balanced through rapid movement or hard rocking. No wobble, no pausing to reset.

Stainless steel underneath. A high-strength frame rated to 300 lbs, in non-toxic, environment-friendly materials.

Use it from above or below. On top or underneath — the bench gives you a different experience depending on where each of you is.

Kind to your floors. Sponge-covered feet protect hard floors and the frame itself.

Five minutes to build, minutes to pack. Straightforward assembly, easy disassembly, and a compact footprint at 22.83" wide.

---

How to Use

Assemble it. Follow the reference images — it takes about five minutes.

Set your height. Use the 3.93" threaded adjustment to dial the bench to the height that works for both of you.

Check the build. Confirm every joint is tight and both elastic bands are seated and properly tensioned.

Fit your toy, if you want one. Press a suction cup toy onto the mounting plate on the lower frame and confirm it's locked before applying weight.

Place it well. Set it on a flat floor with clear space around it. The sponge feet protect the surface and stop it sliding.

Ease your weight on. Apply weight gradually the first time to feel how the parallel bands respond.

Take the armrests. Hold them for balance and leverage — that's what lets you control force and depth without losing stability.

Switch it up. Ride hands-free over the mount, or have one partner on the bench and one underneath, then reverse it.

Break it down. Disassemble for compact storage or to take it with you.

---

Care Instructions

Wipe the frame, elastic bands, and mounting plate with a damp cloth and mild soap, then dry fully.

Clean any toy used on the mount separately, following that toy's own care instructions.

Keep the mounting plate clean and free of dust so suction cups grip at full strength.

Keep the stainless steel dry to protect the finish.

Inspect the elastic bands, frame joints, threaded adjustment, and armrests before each use for wear, stretching, or looseness.

Store disassembled in a cool, dry place away from direct sunlight.

---

Frequently Asked Questions (FAQ)

How much weight does it hold?

Up to 300 lbs on a high-strength stainless steel frame.

What are the dimensions?

22.83" wide and 11.61" tall overall, with a 12.52" seat width and handrails sitting 5.31" above the seat.

How much does the height adjust?

The threaded adjustment gives a 3.93" range.

Does it hold a toy?

Yes. A mounting plate on the lower frame holds a suction cup toy for hands-free play.

What do the armrests do?

They give you something firm to hold for balance and leverage, so you can control the force and depth of movement without losing stability.

Why two elastic bands?

The parallel arrangement spreads your weight across the seat for better support and a smoother rise-and-fall motion.

Can both partners use it?

Yes. One partner can use it on top while the other is underneath, and swapping changes the experience entirely.

How long does assembly take?

About 5 minutes.

Is it portable?

Yes. It disassembles easily for carrying and storage.

Will it damage my floor?

No. The sponge-covered feet protect both your floor and the frame.

What is it made of?

High-strength stainless steel with non-toxic, environment-friendly materials.